User Manual Owner manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Installation environment
- Package contents
- Cable requirements
- Camera descriptions
- Setting up the camera
- Connecting the devices
- Accessing the SDHC card
- Mounting the dome cameras on a ceiling
- Mounting the bullet camera
- Using the camera with TVR 60/ TVN 20/ TVN 40/ LNVR and other systems
- Using the camera with TruVision Navigator
- Chapter 3 Network and streaming configuration
- Chapter 4 Camera configuration
- Chapter 5 Camera management
- Chapter 6 Camera operation
- Appendix A Specifications
- Appendix B Pin definitions
- Index
TruVision Outdoor IP Camera User Manual 51
Appendix A
Specifications
TruVision outdoor IP dome cameras
Electrical
Voltage input
24 VAC ± 10%
PoE (IEEE 802.3af - heater will be disabled)
High PoE (802.3at)
Power consumption
Max. 12 W (w/o heater)
Max. 24 W (heater on)
Miscellaneous
Connectors
AC jack flying lead, RJ45 flying lead
Operating temperature
-40 to +60 °C (-40 to +140 °F)
Storage temperature
-20 to +70 °C (-4 to +158 °F)
Dimensions (D × H)
Φ 160 × 146 mm (Φ 6.29 × 5.75 in.)
Weight
2100 g (4.62 lbs)
Environmental rating
IP66
PC requirements
Intel
-based PC 1 GHz or faster
Memory
1 GB RAM
Operating system
Windows® XP, Vista or Windows 7
CGI
Direct X 9.0 or later
Browser
Microsoft Internet Explorer 6.0 or later