User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
TruVision NVR 10 User Manual 109
Chapter 14
NVR management
This chapter describes:
Updating system firmware
Restoring default settings
Viewing system information
Viewing system logs
Updating system firmware
The firmware on the NVR can be updated using four methods:
Via a USB device
Over the network via an FTP server
Via the NVR web browser
Using TruVision Navigator. For further information, refer to the TruVision Navigator
user manual.
The firmware upgrade file is labeled tvn10.dav.
To update the system firmware using a USB device:
1. Download the latest firmware on to a USB from our web site at:
http://www.interlogix.com/library
- Or -
www.utcfssecurityproductspages.eu/videoupgrades
2. Connect the USB device to the NVR.
3. Click the System Settings icon in the menu toolbar.
4. Select Upgrade > Local Upgrade. The list of files on the USB is displayed (see
Figure 29 on page 104 for an example).
5. Select the file and click Upgrade. Click Yes to begin the upgrade process.