User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
Chapter 4: Operating instructions
TruVision NVR 10 User Manual 17
Name
Description
selected item. In PTZ mode, delete a selected key point. In Log
Search mode, display the details of a log file in Log Search result.
Seq: In Live View mode, start/stop sequencing cameras on the
current monitor.
9
. Menu and Search buttons Menu: Enter/exit the main menu.
Search: In live view, enter the advanced search menu.
10
. Numeric buttons Switch between different cameras in live, PTZ control or playback
modes.
Enter numerals 0 to 9 when using the virtual keyboard.
11
. Status LEDs HDD: HDD indicator blinks red when data is being read from or
written to the HDD. A steady red light indicates an HDD exception
or error.
Network: Flashing green indicates a normal network connection.
No light indicates that the NVR is not connected to any network.
Internal: Green indicates the NVR is working correctly. Red
indicates a fault
Alarm: Red indicates that there is a sensor AlarmIn or another
alarm such as motion or tampering.
Table 3: Front panel button functions by task
Task
Button
Button function
Live view mode
Direction Press to cycle through channels.
Enter Press to show the PTZ control toolbar.
Reverse
Press to play the earliest video file of the current camera (upper-
left video tile if in multiview mode).
Pause
Press to freeze the last image of the live display for all active
cameras displayed.
Play Press to play 24-hour playback of the current camera (upper-left
video tile if in multiview mode).
Live Press to switch to live view mode.
Seq Press to start/stop sequencing cameras on the current monitor.
Hold the Seq button for three seconds to start and stop
sequencing.
Menu Press to enter the main menu.
Playback mode
Direction The left and right buttons are used to speed up and slow down
recorded video. The up and down buttons are used to jump
recorded video forwards or backwards by 30 s.
Enter Press the button to pause the video. Press again to restart the
video.
In single-frame Playback mode
, press to advance the video by a
single frame.