User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
Chapter 7: Network settings
TruVision NVR 10 User Manual 53
To change the default ports:
1. From the menu toolbar, click Network Settings > More Settings.
2. Enter the new Server Port and HTTP Port values.
3. Click Apply to save the settings.
4. Click Back to return to live view, or continue configuring the NVR settings.
RTSP service port setup
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for
use in entertainment and communications systems to control streaming media servers.
To configure RTSP service port:
1. From the menu toolbar, click Network Settings > More Settings.
2. Enter the RSTP port value. The default value is 554.
3. Click Apply to save the settings.
4. Click Back to return to live view, or continue configuring the NVR settings.
Telnet setup
For Technical Support only.