User Manual Manual

ManualsBrandsInterlogix ManualsVideo surveillance systemsTruVision NVR 10

Table Of Contents

Chapter 1 Product overview
- Installation environment
- Default settings to access the device
Chapter 2 Installation
- Installation environment
- Unpacking the TVN 10 and its accessories
- Back panel
- Monitor connections
- Audio inputs and output
- Brackets
Chapter 3 Getting started
- Turning on and off the NVR
- Using the setup wizard
Chapter 4 Operating instructions
- Controlling the TVN 10
- Using the front panel
- Using the mouse
- Using the IR remote control
- Using a keypad
- Menu overview
Chapter 5 Recording settings
- Configuring recording settings
- Configuring recording schedules
- Daily schedules
- Holiday schedules
- Manual recording
- Motion detection schedules
- External alarm schedules
- Protecting recorded files
- Configuring redundant recording
Chapter 6 Alarm settings
- Description of alarm notification types
- Setting up motion detection
- Setting up system notifications
- Setting up external alarms
- Triggering or clearing alarm outputs manually
- Detecting video loss
- Detecting video tampering
Chapter 7 Network settings
- General network settings
- NTP server setup
- Email setup
- FTP server setup to store snapshots
- SNMP setup
- UPnP setup
- Remote alarm host setup
- Multicast setup
- Server and HTTP ports setup
- RTSP service port setup
- Telnet setup
- Checking network status
- Exporting network packet data
- Port forwarding
Chapter 8 Storage management
- Initializing HDDs
- Controlling disk storage mode on the HDD
- Setting up HDD groups
- Setting the HDD property
- Checking HDD status
- Configuring HDD alarms
- Checking the S.M.A.R.T. information
- Bad sector detection
Chapter 9 Camera settings
- Cameras supported
- Adding/removing IP cameras
- Configuring the camera OSD settings
- Setting up privacy masking
- Adjusting video image settings
- Watermarking
- Hiding a camera image from view
- PoE power budget
Chapter 10 Live view
- Description of live view
- Video output
- Audio output
- Controlling live view mode
- Multiview format
- Sequencing cameras
- Accessing frequently used commands
- Configuring live view
- General settings
- Configuring time and date
Chapter 11 Controlling a PTZ camera
- Calling up presets, tours and shadow tours
- Setting and calling up presets
- Setting and calling up preset tours
- Setting and calling up a shadow tour
Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
Chapter 13 Archiving recorded files
- Archiving files
- Creating and archiving video clips
- Archiving snapshots
- Managing backup devices
- Playing back archived files on a PC
Chapter 14 NVR management
- Updating system firmware
- Restoring default settings
- Importing and exporting configuration settings
- Viewing system information
- Searching system logs for events
Chapter 15 User management
- Adding a new user
- Customizing a user’s access privileges
- Deleting a user
- Modifying a user
- Changing the Admin password
Chapter 16 Using the web browser
- Windows Vista and 7 users
- Accessing the web browser
- Web browser overview
- Using the web browser to configure the device
- Searching and playing back recorded video
- Searching for event logs
- Text overlay
- Controlling a PTZ dome camera
Appendix A Specifications
Appendix B Port forwarding information
Appendix C Maximum pre-recorded times
Appendix D Default menu settings
Appendix E Product codes
Index

Chapter 7: Network settings

TruVision NVR 10 User Manual 55

3. The latest information is displayed on the bandwidth used by remote live and

playback as well by Net Receive Idle and Net Send Idle. Click Refresh to update

the information.

Exporting network packet data

When the NVR is connected to a network, you can export the test results to a USB-

flash drive, CD-RW, and other local backup devices.

To export network packet data:

1. From the menu toolbar, click System Settings > Net detect.

2. Select the Network Detection tab.

3. Under the section “Network Packet Export”, click Refresh to get a list of the local

backup devices available. Select one from the list.

4. Click Export. Up to 1M of data can be exported at a time.

5. Click Back to return to live view, or continue configuring the NVR settings.

Port forwarding

When using an internet connection make sure that ports are open or forwarded, as

follows:

• When using TruNav: Port 8000 and 554

• When using a web browser: Port 80 and 554

See “Accessing the web browser” on page 122 for more information.