User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
Chapter 10: Live view
TruVision NVR 10 User Manual 73
Item
Name Description
4
. Previous Screen Displays the previous camera.
5
. Next screen Displays the next camera.
6
. Start Sequence Turn on sequence mode. The window automatically sequences
between cameras. See “Viewing in multiview” on page 73.
Go to Menu > Display Mode Settings > Layout > Dwell Time to set up.
7
. Playback Playback the recorded video of the current day from the selected
camera. See “24-hour playback” on page 93.
8
. Advanced Search Enter the advanced video search menu. See “Searching recorded
video” on page 95 for more information.
9
. Output Mode Select Standard, Bright, Soft, or Vivid mode to display.
10
. Close Timebar Open/close the time bar.
Multiview format
The NVR has full-screen display format as well as five multiview formats.
Viewing in full screen
Press the numeric button on the front panel to switch to the corresponding camera
display. For example, press button 10 to view camera 10.
Right-click the mouse and select Single Camera from the menu. Select the camera
required from the list.
Viewing in multiview
A video tile is any cell in a multiview display. A camera image can only be shown in one
video tile at a time. The NVR has five multiview display formats available as well as full
screen. See Figure 15 below.
To change the multiview display that appears by default, go to the Display menu. See
“Changing the camera sequence” on page 78 for more information.
Figure 15: Multiview display formats