User Manual Manual

Chapter 10: Live view
74 TruVision NVR 10 User Manual
To select a multiview format:
1. Press the Display button on the front panel to cycle through different display
formats.
You can also right-click the mouse and select Multi Camera from the menu. Select
the desired multiview display layout.
Sequencing cameras
The sequencing feature allows a camera to be displayed briefly on screen, before
advancing to the next camera in the sequence list.
The default sequence displays each camera in numerical order. However, each camera
on the monitor can have a pre-programmed dwell time and sequence order. See
“Changing the camera sequence” on page 78 for more information.
Sequencing live view mode using the front panel:
1. Select the camera from where you want to start sequencing.
2. Press the Seq button on the front panel to start sequencing.
3. Press the Seq button again to stop the sequencing.
Sequencing live view mode using the mouse:
1. Select the camera from where you want to start sequencing.
2. Right-click the mouse and select Start Sequence to start the sequencing.
3. Right-click the mouse and select Stop Sequence to stop the sequencing.
Accessing frequently used commands
The quick access toolbar in live view lets you quickly access regularly used commands.
Position the cursor over a video image and left-click the mouse. The toolbar appears
below the selected camera image (see Figure 16 below).