User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
Chapter 10: Live view
TruVision NVR 10 User Manual 81
The start and end time of daylight saving time (DST) in the year can also be set. DST is
deactivated by default. See Figure 22 below for the Time settings window.
Figure 22: Time and date settings window
Table 13: Description of the time and date settings window
Option Description
1.
Time Zone
Select the time zone of the NVR from the drop-down list.
2.
Date Format
Select the date format from the drop-down list. Default format is MM-DD-
YYYY.
3.
Time Format
Select the time format from the drop-down list. Default format is 24-hour
format.
4.
Display Week
Display the day of the week in the monitor time bar.
Check the box to enable/disable. Default format is Disable.
5.
System Date
Define the system date.
Default date is the current date.
6.
System Time
Define the system time.
Default time is the current time.
7.
Auto DST Adjustment
Define DST is automatically. It depends on the time zone selected.
Default format is Disable.
8.
Enable DST
Manually define DST. If this option is selected, the Auto DST adjustment
option is disabled.
Default format is Disable.
Click the check box to enable or disable daylight savings time (DST).
From
Enter the start date and time for daylight savings.
To
Enter the end date and time for daylight savings.
DST Bias
Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.