User Manual Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Recording settings
- Chapter 6 Alarm settings
- Chapter 7 Network settings
- Chapter 8 Storage management
- Chapter 9 Camera settings
- Chapter 10 Live view
- Chapter 11 Controlling a PTZ camera
- Chapter 12 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- 24-hour playback
- Playback speed and skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
- Chapter 13 Archiving recorded files
- Chapter 14 NVR management
- Chapter 15 User management
- Chapter 16 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recorded times
- Appendix D Default menu settings
- Appendix E Product codes
- Index
Chapter 11: Controlling a PTZ camera
TruVision NVR 10 User Manual 85
Figure 24: PTZ configuration window
Table 15: Description of the PTZ configuration window
Name
Description
1
. Save Preset Saves preset.
2
. Call Preset Calls up pre-existing preset.
3
. Shadow Tour
toolbar
Start recording the shadow tour.
Save the shadow tour.
Start the selected shadow tour.
Stop the selected shadow tour.
4
. Preset Tour toolbar
Add a step to a selected preset tour.
Start the selected preset tour.
Stop the selected preset tour.
Delete all the preset tour steps.
Scroll up the preset list.
Scroll down the preset list.
To set up a preset:
1. From the menu toolbar, click PTZ Settings > General.
2. Use the directional, zoom, focus and iris buttons to position the camera in the
desired preset location.