User Manual Owner manual

1BChapter 2: Installation
TruVision Mini PTZ 12X Camera User Manual 17
B. Screws and screw anchors for fixing the standard ceiling mount to a hard ceiling
(not supplied.)
Tools needed
 Tool for drilling
 Tool for screwing
To mount the dome camera on a ceiling
1. Screw the plastic fixing plate to the matching
screw hole on the edge of the dome camera,
as shown.
2. Place the hard ceiling mount in the desired position on the ceiling and mark the
position of the four screw holes.
3. Drill a hole in each marked position.
4. Fix the hard ceiling mount to the ceiling
using the self-tapping screws, as shown.
5. Thread the I/O interface cable and/or
Ethernet cable through the center hole of the
mount and connect the cable to the 22-pin
connector on the base of dome camera.
6. Attach the dome camera to the hard ceiling
mount. Ensure that the central part of dome
camera base is locked into the central hole
of the mount.