User Manual Owner manual

2BChapter 3: Menu overview
24 TruVision Mini PTZ 12X Camera User Manual
Command Function
Camera setup Configures digital zoom, automatic slow shutter, digital noise reduction,
video invert, image freeze, and aperture.
Pan/Tilt setup Configures image flip, tilt limits, proportional speed, auto calibration,
password, OSD menu duration.
ID display Configures camera site ID.
Title display Configures camera title display.
Title setting Configures wording of camera title.
Preset Configures preset points.
Preset tour Configures preset tour, preset tour step, preset position, preset tour
speed, dwell time, and manual preset tour.
Autopan Configures autopan, start point, end point, direction, speed, and
execution.
Shadow tour Configures shadow tour number, record start, and record end.
Auto return Configures auto return, return action selection, preset point selection,
preset tour selection, autopan selection, shadow tour selection, return
time, and manual auto return.
Day/Night
(D/N cameras only)
Configures IR cut filter threshold, and manual control.
Alarm setting Configures alarm setting.
Alarm detection Configures alarm detection.
Privacy mask Configures privacy mask.
Time and date Configures time and date of the dome camera. The camera can time sync
to Digiplex or Impac master time signals, or can be manually set.
Schedule Configures schedules for preset tours/autopans/shadow tours.
Using a keypad to program menus
Use a control device such as a control keypad to configure the camera menu options.
We use the KTD-405 keypad controller (Figure 2) in this manual to explain the
features of the TruVision Mini PTZ 12X Camera because of the KTD-405’s ability to
control all of the camera’s features. (For detailed keypad instructions, refer to the
KTD-405/KTD-405-2D Controller Keypad User Manual.)
You can record the settings for the dome cameras using the checklist in Appendix B
“Camera settings checklist” on page 51. This checklist also lists the default values of
the settings, where applicable.