User Manual Owner manual

3BChapter 4: Basic setup
32 TruVision Mini PTZ 12X Camera User Manual
Function Description
Direction You need to specify whether the camera moves clockwise or
counterclockwise from the start point to the end point before then
returning to the start point.
Select Right for the camera to pan clockwise from the start point to the
end point, and then return to the start point.
Select Left for the camera to pan counterclockwise e from the start
point to the end point, and then return to the start point. See the picture
below.
Start point
Left
Right
Counterclockwise Clockwise
End point
Speed Select the speed at which the camera automatically pans. Choose from
four speed settings (10 to 45°/sec.) where 1 is the slowest.
Run Autopan Once the autopan setup is completed, you can run the autopan
function.
Exit Select Yes to save any changes and return to Main Page 2.
Shadow tour settings
A Shadow Tour is a route formed with manual operation, through adjusting pan and
tilt position, which can be stored and recalled to execute repeatedly.
This function is located on Main Page 2. See Figure 18 on page 33.
Shadow Tours are saved as follows:
Shadow Tour #1 = PTZ Tour 1
Shadow Tour #2 = PTZ Tour 2
Shadow Tour #3 = PTZ Tour 5
Shadow Tour #4 = PTZ Tour 6
Shadow Tour #5 = PTZ Tour 9
Shadow Tour #6 = PTZ Tour 10
Shadow Tour #7 = PTZ Tour 13
Shadow Tour #8 = PTZ Tour 14