Installation Manual

ManualsBrandsInterlogix ManualsAccessoriesBox Camera Outdoor Housing W/Heater & Wall Mt

Table Of Contents

TruVision Box Camera Outdoor Housing with Heater (TVC-OH2-H) and Wall Mount (TVC-M2-WM) Installation Instructions

P/N 1073110-EN • REV C • ISS 02FEB17 1 / 4

TruVision Box Camera Outdoor Housing

with Heater (TVC-OH2-H) and Wall Mount

(TVC-M2-WM) Installation Instructions

Dimensions

Housing

Internal Space

ccessories:

Camera base plate

dimensions

Summary of content (4 pages)

PAGE 1
TruVision Box Camera Outdoor Housing with Heater (TVC-OH2-H) and Wall Mount (TVC-M2-WM) Installation Instructions Dimensions Internal Space: Housing: Accessories: Camera base plate dimensions P/N 1073110-EN • REV C • ISS 02FEB17 1/4
PAGE 2
Screw A: 1/4 - 20 UNC × 10, 2 pcs Used to attach the box camera to camera base plate. Supported cameras The housing can be used with the following box cameras: TVI/Analog Box Camera TVC-4401, TVC-2401 IP Box Camera TVC-1201, TVC-3201, TVC-1202, TVC3202, TVC-5401, TVC-5402, TVC-5403 Screw B: 1/4 – 20 UNC × 14, 2 pcs Used to attach the TVC-OH2-H to the wall mount bracket (TVC-M2-WM). Installation The housing is shipped with a TVC-M2-WM box camera wall mount. Dimensions of TVC-M2-WM: 297.3 × 88 × 122.
PAGE 3
Note: You must install the appropriate lens on the box camera before this step. Please choose a lens with specifications that are suitable for the application. 3. Install the camera and base plate assembly in the housing. Tighten the four screws to keep the camera assembly firmly in place. Terminals: 24 VAC output: Connect the camera 24 VAC input. 12 VDC: Connect the camera 12 VDC power input. The positive/ negative terminals should be distinguished. 4.
PAGE 4
Specifications Power a 24 VAC camera: Heater Dimensions (L × W × H) Fan 445.3 × 169.2 × 110 mm (17.5 × 6.7 × 4.3 in ) Weight 1900 g (4.2 lbs.) Working temperature -40 to +60 ℃ (-40 to +140 °F ) Temperature control Heater on: 5 ℃ ±5 ℃, fan operating for constant temperature; Fan on: 40 °C ±5 ℃, for heat dissipation 24 VAC camera power supply 3. 24 VAC input When you have completed connecting the cables, power on the housing, adjust the lens to zoom and focus. Zoom Power supply 24 VAC 4 A.