Manual
Table Of Contents
- Introduction
- Default settings to access the camera
- Network access
- Camera configuration
- Configuration menu overview
- Local configuration
- System time
- Network settings
- Recording parameters
- Video image
- OSD (On Screen Display)
- Text overlay
- Privacy masks
- Picture overlay
- Motion detection alarms
- Tamper-proof alarms
- Exception alarms
- Alarm inputs and outputs
- Face detection
- Audio exception detection
- Cross line detection
- Intrusion detection
- Defocus detection
- Scene change detection
- Region entrance detection
- Region exiting detection
- Unattended baggage detection
- Object removal detection
- Snapshot parameters
- NAS settings
- Storage devices
- Recording schedule
- RS-485 settings
- Object counting
- Camera management
- Camera operation
4 TruVision Series 4 IP Camera Configuration Manual
Default settings to access the camera
Default credentials
The camera comes with a user account with administrative rights for configuring all
options on the camera. The user name is “admin” and the password is “1234”. It is
highly recommended that the default password be changed during initial setup for
enhanced security.
Default network settings
The network settings are:
IP address: 192.168.1.70
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.1
Ports used:
Browser
TruVision Navigator
RTSP: 554
RTSP: 554
HTTP: 80
Server/client control port: 8000
Please see “Overview of the camera web browser” on page 6 for further information.