Manual

TruVision Series 4 IP Camera Configuration Manual 17
Note: The switch or router to which the camera is connected must support the IEEE
802.1X standard, and a server must be configured. Please apply and register a user
name and password for 802.1X in the server.
To define the QoS parameters:
1. From the menu toolbar, click Configuration > Network > QoS.
2. Configure the QoS settings, including Video / Audio DSCP, Event / Alarm DSCP
and Management DSCP. The valid value range of the DSCP is 0-63. The bigger the
DSCP value, the higher the priority.
3. Click Save to save changes.
To define the FTP parameters:
1. You must have an FTP server configured and available on the network in order to
use the FTP feature
2. From the menu toolbar, click Configuration > Network > FTP.
3. Configure the FTP settings, including server address, port, user name, password,
directory, and upload type.
Anonymous: Check the checkbox to enable the anonymous access to the FTP
server.
Directory: In the Directory Structure field, you can select the root directory, Main
directory and Subdirectory. When the Main directory is selected, you have the
option to use the Device Name, Device Number or Device IP for the name of the
directory; and when the Subdirectory is selected, you can use the Camera Name or
Camera No. as the name of the directory.
Upload Type: To enable uploading the snapshots to the FTP server.
4. Click Save to save changes.
To define the UPnP parameters:
1. Click Configuration > Network > UPnP.
2. Check the checkbox to enable the UPnP function. The name of the device when
detected online can be edited.
3. Click Save to save changes.