User Manual Instruction Manual
Table Of Contents
- Product overview
- Installation
- Programming
- OSD control button
- Access the Setup menu
- Save changes
- Select the lens type
- Set shutter/AGC
- Set white balance
- Set backlight compensation (BLC)
- Adjust the picture characteristics
- Set ATR level
- Set motion detection
- Set privacy area
- Set Day/Night mode
- Set image noise reduction
- Set the camera ID
- Set sync mode
- Select the language
- Reset camera settings
- Specifications
- Menu Map
TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual 15
Set image noise reduction
In the Setup menu, go to NR and select the desired mode. Set the noise
reduction strength of the luminance signal (Y).
Set the camera ID
In the Setup menu, go to Camera ID and press Enter to display the menu. The
camera ID displayed on-screen can have up to 40 characters.
Camera ID input line
Command line
To enter a character, move the cursor to the desired character and press Enter to
select it. It appears in the input line. Repeat the process until all characters are
entered.
To move the character input position in the input line, move the cursor in the
command line to ← or → and press Enter.
To clear the input line, move the cursor to CLR and press Enter.
To delete a character in the input line, select the character so that it blinks. Then
move the cursor to CLR on the command line and press Enter.
To position the camera ID on-screen, move the cursor to POS and press Enter.
The menu will then disappear on-screen and the camera ID will be displayed on
the monitor. Use the menu button to move the camera ID to the desired position.
Press Enter. The menu will reappear. Select Return to return to the previous
menu.