User Manual Instruction Manual
Table Of Contents
- Product overview
- Installation
- Programming
- OSD control button
- Access the Setup menu
- Save changes
- Select the lens type
- Set shutter/AGC
- Set white balance
- Set backlight compensation (BLC)
- Adjust the picture characteristics
- Set ATR level
- Set motion detection
- Set privacy area
- Set Day/Night mode
- Set image noise reduction
- Set the camera ID
- Set sync mode
- Select the language
- Reset camera settings
- Specifications
- Menu Map
TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual 3
• Do not use the camera over the temperature range specifications: -10°C to
+50°C (14°F to 122°F)
• If the light source where the camera is installed experiences rapid, wide-
variations in lighting, the camera may not operate as intended.
WARNING: To reduce the risk of fire or electronic shock, do not expose the
camera to rain or moisture or open the back of the camera.
Product description
Figure 1: Product description
1. Dome cover
2. Screw hole
3. Base
4. OSD control button
5. Lens
6. IR LED
7. IR LED cover
8. Outlet hole
9. Power supply and video BNC cables
10. Composite video BNC cable
11. Focus adjustment
12. Zoom adjustment