Installation Manual

© 2018 United Technologies Corporation. All rights reserved. P/N 1073412-EN • REV B • ISS 23APR18
Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.
TVD-WBS Stainless Steel Dome Wall Mount
Installation Instructions
Specifications
Dimensions
:
175.8 × 202 × 309.9 mm
(6.92 × 7.95 × 12.20 in.)
309.9 mm (12.20 in.)
116.5 mm
(4.59 in.)
175.8 mm
(6.92 in.)
202 mm (7.95 in.)
Weight:
3.33 kg (7.34 lbs.)
A
ccessories:
Expansion anchors: 4
pcs
Used to
install the TVD-WBS stainless steel wall mount to the
mounting surface.
Screw
A: 2 pcs
Used to
lock the wall mount and the cup base.
M4 mm(0.16 in.)
0.8 mm (0.03 in.)
6
mm (0
.24 in
.)
Screw B:
3 pcs
Used to install the
stainless steel dome camera to the TVD-WBS
wall mount
.
7
mm (
0.28 in
.)
14 mm
(0.
55 in.)
3mm
(0.
12 in.)
Supported cameras
The stainless steel dome wall mount can be used with
following cameras:
Stainless Steel Dome Camera: TVD-5801
Installation
To install the stainless steel dome camera to the TVD-
WBS:
1. Use the wall mount base to mark the holes for the four
expansion anchors.
2. Affix the supplied expansion anchors (1) to the mounting
surface.
①