Spec Sheet

Specifications
Model TVE-110 TVE-410 TVE-810 TVE-1610
Description
Video/Audio Input
Video Compression H.264 / MPEG4 / MJPEG
Analog Video Input BNC connector (1.0 Vp-p, 75 Ω); NTSC/PAL adaptive
No. of Analog Channels 1 4 8 16
Audio Compression G.711u
Audio Input (for audio
monitoring sensor with
power supply)
1-ch, 3.5mm interface
(Using Line in)
4-ch pin connector
interface
(2.0 Vp-p, 1 kΩ)
8-ch pin connector
interface
(2.0 Vp-p, 1 kΩ)
16-ch pin connector
interface
(2.0 Vp-p, 1 kΩ)
Bi-directional Audio Input
(for microphone with
power supply)
1-ch, 3.5mm interface
(2.0 Vp-p, 1 kΩ)
1-ch, 3.5 mm audio (2.0 Vp-p, 1 kΩ)
Video/Audio Output
Encoding Resolution 960H (960 x 480) / 4CIF (704 x 480) / 2CIF (704 x 240) / CIF (352 x 240) / QCIF (176 x 120)
Frame Rate H.264/MPEG4/MPEG2 encoding: 25 fps / 30 fps; MJPEG encoding: 15 fps
Stream Type Video / Video & Audio
Dual Stream Supported
Main Stream Frame Rate 960H (Wide D1) / 4CIF / 2CIF / CIF @ 30 fps (60Hz) / 25 fps (P)
Sub Stream Frame Rate 960H (Wide D1) @ 2 fps / 4CIF @ 4 fps / 2 CIF @ 8 fps / CIF @ 12 fps / QCIF @ 30 fps (N) / 25 fps (P)
Video Bit Rate 32 kbps ~ Max. 8192 kbps
Audio Output (for speaker
with power supply)
1-ch, 3.5mm interface (Linear, 600 Ω)
Audio Bit Rate 64 kbps
Two-way Audio Supported
External
Interface
Network Interface 1 RJ45 10/100Mbps auto-negotiate Ethernet Interface
Serial Interface 1 RS-485 interface, half-duplex
Alarm In 1 4 8 16
Alarm Out 1 2 4 4
Miscellaneous
Protocol Support ONVIF Profile S, PSIA and CGI
PTZ Control Protocol TruVision RS-485, TruVision RS-422 protocol, Pelco-D, Pelco-P
Watermark Yes
NAS Yes
Motion Detection Yes
Local Storage
Micro SD/SDHC card slot, up to 32 GB
(card not included)
N/A
Electrical & Mechanical
Voltage/PoE 12VDC / PoE (IEEE802.3-af) 12VDC / N/A
Current 500 mA 670 mA 850 mA 1.85 A
Consumption 6W (Max.) 8W (Max.) 10W (Max.) 22W (Max.)
Operating Temperature 14°F~131°F (-10°C~+55°C)
Operating Humidity 10%~90%
Dimensions
3.2 x 1.5 x 3.5 in.
(80 x 39 x 90mm)
4.5 x 1.9 x 5 in.
(114 x 48 x 128mm)
12.4 x 1.8 x 7.9 in.
(315 x 45 x 200mm)
17.3 x 1.8 x 10.8 in.
(440 x 45 x 274mm)
Weight 0.6 lbs. (270g) 1.23 lbs. (557g) 3.08 lbs. (1396g) 5.48 lbs. (2486g)
Installation
Desktop and rack-mount. For rack mounting the TVE-110/410/810 encoders, use the TVE-RMB rack
mount bracket.
Regulation
Compliance FCC, CE, UL, C-Tick, REACH, RoHS, WEEE