User Manual

TVE-110/410/810/1610 H.264 IP Video Encoder User Manual 7
Figure 4: TruVision Device Manager shortcut icon
To use the TruVision Device Manager:
1. Double-click the shortcut icon to open the tool.
2. The list of TruVision devices located on your network appears.
Note: The TruVision Device Manager can only detect devices that are on the
same LAN. The tool cannot detect devices placed on a VLAN.
The tool identifies:
• Device type
• Device MAC address
• IP address
• Number of video channels supported by the device
• Connection port
• Software version
• Device serial number
• DSP/firmware version
• Device subnet mask
• Device start time