User Manual

12 TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
Name Description
5
.
Video function toolbar Switch to main or substream.
/
Click to start/stop live view.
Enable e-PTZ (must be supported by the connected
camera).
Click to capture a snapshot of a video image. The image
is saved on the computer.
/
Click to manually start/stop recording video.
Click to display the previous camera view.
Click to display the next camera view.
/
Click to turn audio on/off.
/
Start/Stop two-way audio.
6
.
Video parameters Adjust the brightness, hue, saturation and contrast of live video.
7
. Preset
setup/selection
Set up and select presets.
8
. PTZ control panel Control PTZ of the currently selected camera, adjust the speed of
PTZ movement and turn on/off the camera light and wiper.
To see live view:
1. Open the encoder’s web browser screen. See Figure 6.
2. Double-click a camera from the device list to select a camera to view.
3. Click the Display Format button to view multiple video tiles.
Capturing a snapshot
In live view mode, click the snapshot button on the video function toolbar to
capture live pictures. A pop-up message will appear on screen to confirm that the
capture was successful. The image is saved as a JPEG file on the computer.
Note: Configure where the snapshots are saved on your computer in the
Configuration > Local Configuration page.