User Manual

TVE-110/410/810/1610 H.264 IP Video Encoder User Manual 23
3. Click Save to save the settings.
Note: It will ask you to reboot the device to activate the settings.
To configure QoS settings:
1. Click the Configuration > Remote Configuration > Network Settings >
QoS. The QoS window appears.
2. Check the checkbox to enable the QoS function.
3. Enter the DSCP (Differentiated Services Codepoint) value for the video/audio,
event/alarm and management traffic. This value is used to mark the traffic’s
IP header. The DSCP value defines the priority level for the specified type of
traffic, for example, how much bandwidth to reserve for it.
The valid value range of the DSCP is 0-63. The higher DSCP value indicates
higher priority level.
4. Click Save to save the settings.
Note: It will ask you to reboot the device to activate the settings.
To configure FTP settings:
1. Click Configuration > Remote Configuration > Network Settings > FTP.
The FTP window appears.
2. Check the Enable FTP checkbox.
3. Configure the FTP settings, including server address, port, user name,
password, directory, and upload type.