User Manual

TVE-110/410/810/1610 H.264 IP Video Encoder User Manual 25
2. Check the checkbox to enable the UPnP function.
3. Select the Port Mapping Mode to Auto or Manual.
If you select Auto, the mapping ports can be automatically assigned by the
router.
If you select Manual, go to Step 4 to edit the mapping ports.
4. Configure the HTTP Port (for access by WEB browser), SDK Port Mapping
(for access by client software), RTSP Port and HTTPS Port respectively.
Notes:
1) You can use the default port number, or change it according to actual
requirements.
2) The ports indicate the port number for mapping in the router.
5. Click Save to save the settings.
After port mapping is successful, you can view the status of the port mapping
in the Port Status area.