User Manual
Table Of Contents
26 TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
To configure HTTPS settings:
1. Click the Configuration > Remote Configuration > Network Settings >
HTTPS. The HTTPS window appears.
2. Create the self-signed certificate or authorized certificate (see steps below).
Create the self-signed certificate
1. Click the Create button to create the following dialog box.
Enter the country, host name/IP, validity and other information.
2. Click OK to save the settings.
Create the authorized certificate
1. Click the Create button to create the certificate request.
2. Download the certificate request and submit it to the trusted certificate
authority for signature.
3. After receiving the signed valid certificate, import the certificate to the device.
4. When you have successfully created and installed the certificate, check the
checkbox to enable the HTTPS function.
Note: After the HTTPS feature is enabled, the system will use the HTTPS
login mode by default when you input the IP address (e.g., https://192.0.0.64).
You can also input http://IP address/index.asp (e.g.,