User Manual

28 TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
5. Click Save to save the settings.
To configure Multicast Address settings:
1. Click the Remote Configuration > Network Settings > Advanced. The
Advanced window appears.
2. Enter the multicast address in the text filed.
3. Click Save to save the settings.
Note: The device will reboot automatically to activate the multicast address
settings.
To configure Remote Alarm Host settings:
1. Click the Configuration > Remote Configuration > Network Settings >
Advanced. The Advanced window appears.
2. Enter the alarm host IP and alarm host port values.
The Alarm Host IP refers to the IP address of the remote PC on which the
CMS (Client Management System) software is installed, and the Alarm Host
Port must be the same as the alarm monitoring port configured in the
software (default port is 7200).
3. Click Save to save the settings.