User Manual

34 TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
2. Select a camera from the drop-down list. Each camera must be set up
individually.
3. Check Enable Motion Detection.
4. Select the area sensitive to motion and the sensitivity level.
Click Draw Area. Click and drag the mouse cursor across the screen. The
area selected appears as a red grid. Areas covered by the red grid are
sensitive to motion detection. Up to eight areas can be drawn. Click Stop
Drawing when completed. Click Clear All to clear the screen.
Drag the Sensitivity scroll bar to the desired sensitivity level. The highest
value is on the right of the bar.
Click Save to save the settings.
Check the Enable Dynamic Analysis checkbox to enable motion detection.
When enabled, the motion detection triggered frame (green) for the moving
targets in the motion detection area will be displayed on the live video.
5. Select the recording schedules for motion detection.
Click the Arming schedule tab. Click Edit.
Select the day of the week when motion can be recorded. Click to set the
time periods for the arming schedule during the day. You can schedule up to
eight time periods in a day. Default is 24 hours. Click OK.