User Manual

TVE-110/410/810/1610 H.264 IP Video Encoder User Manual 37
6. Click Save to save settings.
To configure an alarm output:
1. Click Configuration > Remote Configuration > Alarm Settings > Alarm
Output. The Alarm Output Settings window appears.
2. Select an alarm output.
3. Select a delay option.
The Delay setting lets you define how long a signal remains active after the
alarm has ended. Select a time out option: 5, 10, and 30 seconds, 1, 2, 5, and
10 minutes, and Manual clear. If “Manual clear” is selected, the alarm output
will stop only when the alarm input stops.
4. Select the recording schedules for the alarm output.