User Manual

TVE-110/410/810/1610 H.264 IP Video Encoder User Manual 39
Tamper-proof alarm
Video tampering, such as moving a camera to a different position, can also be
detected and set to trigger an action on the encoder.
Note: It is strongly recommended not to configure for video tampering when
using PTZ dome cameras.
To configure tamper-proof detection:
1. Click Remote Configuration > Camera Settings > Tamper-proof. The
Tamper-proof window appears.
2. Select camera for which to set up tamper-proof detection.
3. Check the Enable Tamper-Proof box.
Note: Under Area Settings, the full screen is set for tamper-proof detection.
This cannot be changed.
4. Select the Arming Schedule tab and click Edit to modify the arming
schedule for video loss detection. The configuration is the same as that for
the arming schedule for motion detection.
5. Select the Linking Method tab. Then select the response method to notify
you of the alarm.
6. Click Save to save the settings.
Exception
The exception type can be HDD full, HDD error, network disconnected, IP
address conflict, invalid login, video signal exception, and record/capture
exception.
• HDD Full: All installed HDDs are full and will not record any more video.