User Manual

46 TVE-110/410/810/1610 H.264 IP Video Encoder User Manual
To auto delete recordings:
1. Click Configuration > Remote Configuration > Camera Settings > Record
Schedule. The Record Schedule window appears.
2. Configure the recording schedule of a camera.
3. Click Advanced in the Record Schedule window.
Under Expired Time select the number of days after which recorded video
from the specified camera is permanently deleted from the HDD.
4. Click OK. Return to the Record Schedule window.
5. Click Save to save the settings.
To overwrite recordings:
Select to overwrite the earlier recorded files or not when the HDD is full. If the
Overwrite mode is enabled, the earlier recorded files will be overwritten when the
HDD is full; otherwise, the recording will stop and trigger alarm when the HDD is
full.
1. Click Configuration > Remote Configuration > Camera Settings > Record
Schedule. The Record Schedule window appears.
2. Configure the recording schedule of a camera.
3. Click Advanced in the Record Schedule window.
Under Overwrite select Yes, the earlier recorded files will be overwritten
when the HDD is full.
4. Click OK. Return to the Record Schedule window.
5. Click Save to save the settings.
To record audio:
1. Click Configuration > Remote Configuration > Camera Settings > Record
Schedule. The Record Schedule window appears.
2. Configure the recording schedule of a camera.
3. Click Advanced in the Record Schedule window.
Under Record Audio select Yes to enable the audio record.
4. Click OK. Return to the Record Schedule window.
5. Click Save to save the settings.
To configure record stream type:
1. Click Configuration > Remote Configuration > Camera Settings > Record
Schedule. The Record Schedule window appears.
2. Configure the recording schedule of a camera.
3. Click Advanced in the Record Schedule window.
Under Stream Type select Main Stream or Sub Stream for analog camera
recording.