Installation Manual

4 Installation Manual
Product overview
This is the installation manual for the following TruVision Covert IP camera models:
 TVA-1101 (1.3MPX IP ATM/covert camera, WDR, PAL)
 TVA-3101 (1.3MPX IP ATM/covert camera, WDR, NTSC)
 TVL-0101 (TruVision Covert Lens, 1.3MPx, Pinhole, 3.7mm@ F2.3, 2m cable)
 TVL-0102 (TruVision Covert Lens, 1.3MPx, L-shape, 3.7mm@ F2.3, 2m cable)
 TVL-0103 (TruVision Covert Lens, 1.3MPx, Cylinder, 4mm@ F2.0, 2m cable)
 TVL-0104 (TruVision Covert Lens, 1.3MPx, Pinhole, 3.7mm@ F2.3, 8m cable)
 TVL-0105 (TruVision Covert Lens, 1.3MPx, L-shape, 3.7mm@ F2.3, 8m cable)
 TVL-0106 (TruVision Covert Lens, 1.3MPx, Cylinder, 4mm@ F2.0, 8m cable)
 TVL-0107 (TruVision Covert Lens, 1.3MPx, L-shape, 2mm@ F2.0, 2m cable)
 TVL-0108 (TruVision Covert Lens, 1.3MPx, Cylinder, 2mm@ F2.0, 2m cable)
 TVL-0109 (TruVision Covert Lens, 1.3MPx, L-shape, 2mm@ F2.0, 8m cable)
 TVL-0110 (TruVision Covert Lens, 1.3MPx, Cylinder, 2mm@ F2.0, 8m cable)
Installation
This chapter provides information on how to install the cameras.
Installation environment
When installing your product, consider these factors:
• Electrical: Install electrical wiring carefully. It should be done by qualified service
personnel. Always use a proper PoE switch or a 12 VDC UL listed Class 2 or CE
certified power supply to power the camera. Do not overload the power cord or
adapter.
• Ventilation: Ensure that the location planned for the installation of the camera is
well ventilated.
• Temperature: Do not operate the camera beyond the specified temperature,
humidity or power source ratings. The operating temperature of the camera is
between -30 to +60°C (-22 to 140°F). Humidity is below 90%.
• Moisture: Do not expose the camera to rain or moisture, or try to operate it in wet
areas. Turn the power off immediately if the camera is wet and ask a qualified
service person for servicing. Moisture can damage the camera and also create the
danger of electric shock.