Installation Manual

Installation Manual 9
Cylinder lens:
Mounting bracket
Drywall anchor Ø7.5 x 24.5 mm (3
pcs)
Screw A Ø4 x 25 mm (3 pcs)
L-shape lens (2 mm):
Cover
Adhesive tape
Drywall anchor Ø7.5 x 24.5 mm (3 pcs)
Screw A Ø4 x 25mm (3 pcs)
Set up camera unit
Note: If the light source where the camera is installed experiences rapid, wide-
variations in lighting, the camera may not operate as intended.
Install a camera block:
1. Prepare the mounting surface. The surface should be smooth and clean.
2. Fix the mounting rack on the mounting surface using the enclosed screws A.