User Manual

4BChapter 5: Live view
36 TruVision NVR 21 User Manual
Note: “X” means that the camera is not displayed.
7. Click Apply to save the settings.
8. Click Back to return to live view.
General settings
Use this screen to configure the monitor image, GUI language, login password
requirement, monitor resolution as well as to configure the NVR name and
address. See Figure 17 below.
The NVR can support NTSC or PAL video output. The video format is auto
detected.
The changes are immediately implemented once Apply is clicked to save the
settings.
Figure 17: Monitor setup screen: General Settings
Table 11: Description of the Monitor setup screen: General Settings
Option
Description
Language
Change the language of the system.
Select the desired language from the drop-down list and click
Apply. The language displayed changes immediately.
Device name
Define the NVR name. The default name is TVN 21.
Click the edit box and enter the new name from the soft keyboard.
Device address
The device number to use for the NVR when programming the
remote control. The default value is 255.
Zone ID
Each NVR in a daisy chain must have a unique zone ID so that it
can be controlled by a KTD-405 keypad.
The default value is 1.
VGA resolution
Define the VGA resolution.
Select one of the options from the drop-down list and click Apply.
The selected resolution must be the same as that of the monitor.
HDMI resolution
Define the HDMI resolution.
Select one of the options from the drop-down list and click Apply.
The selected resolution must be the same as that of the monitor.