User Manual

9BChapter 10: Recording
TruVision NVR 21 User Manual 85
3. Check the Enable Schedule box.
4. Click Edit. The following screen is displayed (by default, All Day is selected):
5. Select the day of the week for which you want to set up the schedule.
You can define a schedule for each day of the week.
6. Set the start and end time for recording.
Define a time period by entering a start (left column) and end (right column)
time. You can schedule up to eight time periods. Click All Day to record all
day.
Note: Time periods defined cannot overlap.
7. Select a recording type.
This setting instructs the NVR to begin recording when an alarm is triggered.
The recording type can be based on time and triggered by motion detection
and/or an alarm. If set to TimeLapse (TL-Hi or TL-Lo), the NVR records
continuously.
8. Click Apply to save settings
9. Repeat steps 3 to 8 for other days of the week or to copy the schedule
settings to another day.
To copy the current schedule settings to another day of the week, click Copy.
Select the number of the day of the week to which to copy the schedule and
click OK to save changes and return to the Edit screen.
10. Repeat steps 3 to 9 for other cameras.
11. Click Apply to save the settings and then OK to return to the schedule
screen.
Holiday schedules
As well as being able to schedule when recordings occur during the week, you
can also schedule them for specific holidays in the year such as the first of