User Manual

ManualsBrandsInterlogix ManualsNVR8Ch TruVision High Performance NVR Plus 4TB

111

112

113

114

115

116

117

118

119

120

Table Of Contents

Chapter 1 Product overview
- Installation environment
- Default settings to access the device
Chapter 2 Installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel
- Wiring the keypad
- RS-485 ports
- RS-232 port
- PoE ports
- Monitor connections
- Audio inputs and output
- Brackets
Chapter 3 Getting started
- Turning on and off the recorder
- Using the setup wizard
Chapter 4 Operating instructions
- Controlling the recorder
- Using the front panel
- Using the mouse
- Using the IR remote control
- Menu overview
Chapter 5 Live view
- Description of live view
- Video output
- Monitor output
- Audio output
- Controlling live view mode
- Multiview format
- Sequencing cameras
- Accessing frequently used commands
- Configuring live view
- General settings
- Configuring time and date
Chapter 6 Controlling a PTZ camera
- Changing PTZ camera settings
- Calling up presets, tours and shadow tours
- Setting and calling up presets
- Setting and calling up preset tours
- Setting and calling up a shadow tour
Chapter 7 Playing back a recording
- Overview of the playback window
- Playback pop-up menu
- Instant playback
- All-day playback
- Playback skip time
- Searching recorded video
- Playing back recordings by time and video type
- Playing back recordings by event
- Creating and playing back bookmarked recordings
- Slideshow of snapshots
- Playing back recordings from the system log
- Playing back frame-by-frame
- Digital zoom in playback
Chapter 8 Archiving recorded files
- Archiving files
- Auto archiving
- Creating and archiving video clips
- Archiving snapshots
- Managing backup devices
- Playing back archived files on a PC
Chapter 9 Using the web browser
- Windows 7 and 8 users
- Accessing the web browser
- Web browser overview
- Using the web browser to configure the device
- Searching and playing back recorded video
- Searching for event logs
- Recording from the browser
- Dual stream recording
- Controlling a PTZ dome camera in the web browser
- Capturing text insertions
- Text overlay
- Using a network storage system
Chapter 10 Recording
- Configuring recording settings
- Using an external recording device
- Configuring recording schedules
- Daily schedules
- Holiday schedules
- Manual recording
- Motion detection schedules
- External alarm schedules
- Protecting recorded files
- Configuring redundant recording
- Capturing text insertions
- Failover and recovery
Chapter 11 Alarm settings
- Description of alarm notification types
- Setting up motion detection
- Video analytics
- Setting up system notifications
- Setting up external alarms
- Triggering or clearing alarm outputs manually
- Detecting video loss
- Detecting video tampering
Chapter 12 Network settings
- Configuring general network settings
- Configuring an NTP server
- Configuring e-mail
- Configuring SNMP
- Configuring UPnP
- Configuring an FTP server to store snapshots
- Configuring a remote alarm host
- Configuring multicast
- Configuring the server and HTTP ports
- Configuring the RTSP service port
- Telnet set up
- Checking network status
- Exporting network packet data
- Port forwarding
Chapter 13 Storage management
- Initializing HDDs
- Controlling disk storage mode on the HDD
- Setting up HDD groups
- Setting the HDD property
- Checking HDD status
- Configuring HDD alarms
- Managing eSATA
- Checking the S.M.A.R.T. information
- Bad sector detection
Chapter 14 Camera settings
- Cameras supported
- Adding IP cameras to the recorder
- PoE power budget
- Accessing IP cameras connected to an internal switch
- Configuring the camera OSD settings
- Setting up privacy masking
- Adjusting video image settings
- Watermarking
- Hiding a camera image from view
Chapter 15 Recorder management
- Configuring the RS-232 port
- Updating system firmware
- Restoring default settings
- Importing and exporting configuration settings
- Viewing system information
- Searching system logs for events
Chapter 16 User management
- Adding a new user
- Customizing a user’s access privileges
- Deleting a user
- Modifying a user
- Changing the Admin password
Appendix A Specifications
Appendix B PTZ protocols
Appendix C Port forwarding information
Appendix D KTD-405 keypad
- Supported firmware
- Wiring the keypad
- Setting up the keypad to work with the recorder
- Operating the keypad
Appendix E Maximum pre-recording times
Appendix F Supported PTZ commands
Appendix G Default menu settings
Index

Chapter 12: Network settings

106 TruVision NVR 21(S/P) User Manual

Option

Description

Working M

ode The recorder has two 10M/100M/1000M NIC cards that support net

fault tolerance, load balance, and multi-address modes. Select one of

the options:

Net Fault tolerance: When one LAN port fails, the other one takes over.

This is the default option.

Load Balance: The bandwidth is divided over the two LAN ports with

one IP address.

Multi-address: Each LAN port is separate with its own IP address. This

allows one LAN port for the IP cameras and the

other for client PCs such

as TruNav.

Select NIC

Select which LAN port is being defined.

NIC T

ype Network interface card (NIC) is a device used to connect the recorder to

a network. Select the NIC type used from the drop-down list.

Default value is 10M/100M/1000M self-adaptive.

Enable DHCP

Check this box if you have a DHCP server running and want your

recorder to automatically obtain an IP address and other network

settings from that server.

Default value is Disabled.

IPv4 A

ddress Enter the IP address for the recorder.

Default value is 192.168.1.82.

IPv4 Subnet M

ask Enter the subnet mask for your network so the recorder will be

recognized within the network.

Default value is 255.255.255.0

IPv4 Default G

ateway Enter the IP address of your network gateway so the recorder will be

recognized within the network. This is typically the IP address of your

router.

Default value is 192.168.1.1

IPv6 A

ddress 1 Enter the IPv6 address for the recorder.

Default value is fe80::240:30ff:fe48:2975/64.

IPv6 A

ddress 2 Enter the IPv6 address for the recorder.

IPv6 Default G

ateway Enter the IPv6 address of your network gateway so the recorder will be

recognized within the network. This is typically the IP address of your

router.

MAC A

ddress Display the MAC address.

MTU

(bytes) Enter a value between 500 and 9676. Default is 1500.

Preferred DNS S

erver Enter the preferred domain name server to use with the recorder.

Alternate DNS S

erver Enter the alternate domain name server to use with the recorder.

Main NIC

(or

DefaultRroute)

Select the main LAN port when net fault tolerance or load balance mode

is selected. LAN I is default.

Select which LAN is the main route when multi-address mode is

selected.

Note: Not available on the TVN 21S.

Internal NIC IPv4 Address

Enter the IP address of the PoE switch in the recorder. This setting is

only available for the TVN 21S.