TruVision NVR 21(S/P) Quick Start Guide P/N 1072630F-EN • REV 1.
Copyright Trademarks and patents Contact information © 2015 United Technologies Corporation. Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation. All rights reserved. Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products. www.interlogix.com or www.utcfssecurityproducts.
Figure 1: Back panel connections TVN 21(P) TVN 21S 1. 2. 3. 4. 5. 6. 7. 8. Connect to one CCTV monitors (BNC-type connectors). Connect one audio input to RCA connectors. Connect to a RS-232 device. Connect to a network. Connect to an optional eSATA device such as SATA HDD, CD/DVD-RM. Connect to a power cord. Connect to speakers for audio output. Connect to a VGA monitor. TVN 21(S/P) Quick Start Guide 9. 10. 11. 12. 13. 14. 15. 16. 17. Connect to a HDTV.
Figure 2: Front panel controls For detailed information on all the button functions, please refer to the user manual. Name Description 1. Channel buttons Switch between different cameras in live, PTZ control or playback modes. Enter numerals 0 to 9 when using the virtual keyboard. 2. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a USB mouse, CD/DVD burner, and USB Hard Disk Drive (HDD). 3.
Name Description Tour: In PTZ control mode, press Tour and a numeric button to call up preprogrammed shadow tours. 7. IR receiver Receiver for IR remote control. 8. Playback buttons Reverse: In live view, play the earliest video file of the current camera; In video playback mode, playback a camera in reverse direction; In picture playback mode, view pictures in reverse direction. Pause: In live view mode, freeze the last image of of the live display for all cameras in the selected display mode.
1. Connect all the devices required to the back panel of the recorder. See Figure 1 on page 3. Basic connections: Connect monitor A to the BNC, VGA or HDMI output. Connect the mouse to the USB port in the front panel. Optional connections: All the other connections shown are optional and depend upon installation requirements. • Web browser Front panel The buttons on the front panel control most functions. See Figure 2 on page 4 for the locations of the controls.
Web browser control The TVN 21 Web browser lets you view, record, and play back videos as well as manage all aspects of the recorder from any PC with Internet access. The browser’s easy-to-use controls give you quick access to all recorder functions. See Figure 3 below. of the mouse on the camera image. The shortcut pop-up toolbar appears. See Figure 4 below for a description of the functions available.
Name Configures standard network settings. Description day is selected by default. 8. Monitor B Switch between monitors A (main) and B (spot). Configures alarm settings. 9. Advanced search Enter the advanced video search menu. Configures PTZ settings. 10. Output mode Select Standard, Bright, Soft, or Vivid mode to display. Configures user settings. 11. Close timebar Open/close the time bar. Configures system settings.