Quick Start Guide

ManualsBrandsInterlogix ManualsNetwork Video Recorders16 Channel IP Network Video Recorder - 12TB

Table Of Contents

P/N 1073193-EN • REV C • ISS 16AUG16

TruVision NVR 22 (S/P) Quick Start

Guide

Figure

1: Back panel connections (TVN 22S shown)

1. Connect one audio input to RCA connectors.

2. Connect to an HDTV. The HDMI connection

supports both digital audio and video.

3. Connect one CCTV monitor (BNC-type

connectors).

4. Connect to a RS-232 device.

5. RS-485 port not used.

6. Connect to a keypad (KTD-405 shown).

7. Connect up to four alarm relay outputs.

8. Connect to a network (RJ45).

9. Connect to speakers for audio output.

10. Connect to a VGA monitor.

11. Universal Serial Bus (USB). Connect to an

additional device such as a USB mouse,

CD/DVD burner, or USB HDD.

12. Connect to an optional eSATA device such as

HDD, CD/DVD-RM.

13. Connect up to 16 alarm inputs (depending on

model).

14. Connect to ground.

15. Connect to a power cord.

16. 8/16 PoE ports (depending on model). (TVN 22S

only)

Default user ID and password:

• User ID: admin

• Password: 1234

Default IP address: 192.168.1.82

Summary of content (8 pages)

PAGE 1
TruVision NVR 22 (S/P) Quick Start Guide Figure 1: Back panel connections (TVN 22S shown) 1. Connect one audio input to RCA connectors. 2. Connect to an HDTV. The HDMI connection supports both digital audio and video. 3. Connect one CCTV monitor (BNC-type connectors). 4. Connect to a RS-232 device. 5. RS-485 port not used. 6. Connect to a keypad (KTD-405 shown). 7. Connect up to four alarm relay outputs. 8. Connect to a network (RJ45). 9. Connect to speakers for audio output. 10. Connect to a VGA monitor.
PAGE 2
Figure 2: Front panel controls For detailed information on all the button functions, please refer to the user manual. 1. Name Description Channel buttons Switch between different cameras in live, PTZ control or playback modes. Use the soft keyboard to enter numerals 0 to 9. 2. Display buttons F1: In Playback mode, click to start and stop video clipping. For audio, press F1 and a numerical button to play the audio of the specified camera in live view. In System Information mode, get the DDNS URL.
PAGE 3
5. Front panel lock You can lock or unlock the front panel with a key (provided). 6. Status LEDs Power: A steady green light indicates the recorder is working correctly. Red indicates a fault. Event Alarm: A flashing red light indicates that there is a sensor Alarm In or another alarm such as motion or tampering. No light indicates that there is no alarm. HDD: HDD indicator blinks red when data is being read from or written to the HDD. A steady red light indicates an HDD exception or error.
PAGE 4
Figure 3: Quick access toolbar 1. Pause: Freeze live image of the selected camera. 2. Start Manual recording: Start/stop manual recording. 3. Instant Playback: Play back the recorded video from the last five minutes. 4. Audio On: Enable/disable audio output. 5. Snapshot: Capture a snapshot of a video image. PTZ Control: Enter PTZ control mode. Digital Zoom: Enter digital zoom mode. Image Settings: Modify the image lighting levels. Auxiliary Focus: Automatically focus the camera lens. 10.
PAGE 5
By default, the setup wizard will start once the recorder has loaded. The wizard walks you through some of the more important settings of your recorder. Select the preferred language for the system and then enter the administrator password. The default admin password is 1234. It is strongly recommended that this password is changed. The wizard will then guide you through the menus to set the time and date, network configuration, HDD management, and recording configuration.
PAGE 6
• Gateway address - 192.168.1.1 • Server Port: 8000 • HTTP Port: 80 • RTSP port: 554 Note: The following ports need to be forwarded in the router in order to connect properly: Server port and RTSP port. • Right-click the mouse and select Menu from the pop-up menu. The main menu screen appears. Move the mouse over a command icon in the menu toolbar and click to select it. Figure 4: Web browser interface Description of the command icons in the menu toolbar: Configures display settings.
PAGE 7
Configures user settings. View system information. Provides reference information to the various toolbars and menus within the interface. Provides access to logout, reboot and shutdown options. Specifications Power supply: TVN 22 100 to 240 VAC, 1 A, 50 to 60 Hz TVN 22S 100 to 240 VAC, 2.
PAGE 8