User Manual

Chapter 14: Device management
106 TruVision NVR 22 (S/P) User Manual
Figure 27: Time and date settings window
Table 15: Description of the Time and Date settings window
Option Description
1.
Time
Zone Select a time zone from the list.
2.
Date
Format Select the date format from the drop-down list. Default format is DD-MM-
YYYY.
3.
Time
Format Select either the 12-hour or 24-hour time format from the list. Default
format is 24-hour format.
4.
Display
Day Check to display the day of the week in the monitor time bar.
Check the box to enable/disable. Default is Disable.
5.
System
Date Enter the system date.
Default date is the current date.
6.
System
Time Enter the system time.
Default time is the current time.
7.
Auto DST A
djustment Enable to activate DST is automatically. It depends on the time zone
selected.
Default is Disable.
8.
Enable DST
Manually define DST. If this option is selected, the Auto DST adjustment
option is disabled.
Default is Disable.
Click the check box to enable or disable daylight savings time (DST).
From
Enter the start date and time for daylight savings.
To
Enter the end date and time for daylight savings.
DST B
ias Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.