User Manual

Chapter 14: Device management
TruVision NVR 22 (S/P) User Manual 107
General recorder settings
Use the General Settings menu of Device Management to configure general recorder
options.
See Figure 28 and Table 14 on page 107 for the general options available. The
changes are immediately implemented once Apply is clicked to save the settings.
Figure 28: General settings of the recorder
Table 16: Description of the Monitor setup window: General settings
Option Description
1.
Language
Define the language of the system.
Select the desired language from the drop-down list and click Apply. The
language displayed changes immediately.
Default is English.
2.
Device Name
Define the recorder name.
Click the edit box and enter the new name from the soft keyboard.
3.
Remote Control ID
The device number to use for the recorder when linking the device to a
remote control. The default value is 255.
4.
Key
pad Zone ID The Keypad Zone ID number.
5.
Menu Timeout
Define the time in minutes after which the menu window reverts to live
view mode. Select a time from the drop-down list, and click Apply. Menu
timeout also applies to the system idle time after which a password will be
required.
Default value is 5 minutes.
6.
Output Mode
Select from Auto, HDMI, and VGA.