User Manual

TruVision NVR 22 (S/P) User Manual 7
Chapter 3
Getting started
Powering on the recorder
Before starting the recorder, connect at least one monitor (HDMI or VGA). Otherwise,
you will not be able to see the user interface and operate the device.
The recorder auto-detects the video mode (PAL or NTSC) on startup.
It comes equipped with a universal power supply that will auto-sense 110/240 V,
60/50 Hz.
Note: It is recommended that an uninterruptible power supply (UPS) is used in
conjunction with the device.
To turn on the recorder:
Turn on the recorder using the power switch on the back panel. Once it is powered up,
the status LEDs on the front panel will light up.
To turn off the recorder:
1. In live view mode, right-click the mouse and click Menu > Shutdown.
2. In the Shutdown popup menu, select Shutdown. Click Yes to confirm shutdown.
You will be requested to enter the Admin password.
To reboot the recorder:
1. In live view mode, right-click the mouse and click Menu > Shutdown.
2. In the Shutdown popup menu, select Reboot. Click Yes to confirm reboot.
You will be requested to enter the Admin password.