User Manual

Chapter 17: System information
130 TruVision NVR 22 (S/P) User Manual
Note: Connect the backup device, such as a USB flash drive, to the recorder before
commencing the log search.
To search video from the system log:
1. From the menu toolbar, click System Information > Log Search.
2. Select the search start and end date and times.
3. Under Event, select an option from the drop-down list: All, Alarm, Notification,
Operation, or Information.
4. From the Type list, select one of the options:
Event Type
All All
Alarm All, Alarm Input, Alarm Output, Start Motion Detection, Stop Motion Detection,
Start Camera Tamper, Stop Camera Tamper, Cross Line Alarm Stopped, Cross
Line Stopped, Perimeter Intrusion Alarm Started
Notification All, Video Loss Alarm, Illegal Login, HDD Full, HDD Error, Duplicate IP Address
Found, Network Disconnected, Abnormal Record, IP Camera Disconnected, IP
Camera Address Conflicted, IP Camera Access Exception, Record Buffer
Overflow, Hot Spare Exception, IP Camera Motion Analysis Exception, PoE
Power Overload
Operation All, Power Up, Local: Shutdown, Abnormal Shutdown, Watchdog Reboot, Local:
Restart, Local: Login, Local: Logout, Local Configure Parameters, Local:
Upgrade, Local Operation: Restore Defaults, Local: Factory Defaults, Local: Start
Manual Recording, Local: Stop Manual Recording, Local: PTZ Control, Local:
Lock File, Local: Unlock File, Local: Trigger Alarm Output, Local: Initialize HDD,
Local: Add IP Camera, Local: Delete IP Camera, Local: Set IP Camera, Local:
Upgrade IP Camera Firmware, Local: Import IP Camera File, Local: Export IP
Camera File, Local: Playback by File, Local: Playback by Time, Local: Playback
by Snapshot file, Local: Export Config File, Local: Import Config File, Local:
Export Record File, Local: Snapshot File, Local: Add Network Storage, Local:
Delete Network Storage, Local: Set Network Storage, Local: Restore Admin’s
Password, Local: Operate Bookmark, Local: Import Audio File, Local: Delete
Audio File, Local: Switch Output, Local: HDD Detect, Local: Unload HDD, Local:
Load HDD, Local: Delete HDD, Local: Configure SNMP, Local: Add/Delete
Working Device, Local Operation: Export Heat Map File, Local Operation: Export
People Counting File, Quick Snapshot, Playback Snapshot, Remote: Shutdown,
Remote: Reboot, Remote: Login, Remote: Logout, Remote: Configure
Parameters, Remote: Upgrade, Remote Operation: Restore Defaults, Remote
Operation: Factory Defaults, Remote: Start Manual Recording, Remote: Stop
Manual Recording, Remote: PTZ Control, Remote: Lock File, Remote: Unlock
File, Remote: Trigger Alarm Output, Remote: Initialize HDD, Remote: Add IP
Camera, Remote: Delete IP Camera, Remote: Set IP Camera, Remote: Upgrade
IP Camera Firmware, Remote: Import IP Camera File, Remote: Export IP
Camera File, Remote: Playback by File, Remote: Playback by Time, Remote:
Download by File, Remote: Download by Time, Remote: Export Config File,
Remote: Import Config File, Remote: Export Record File, Remote: Export
Snapshot File, Remote: Get Parameters, Remote: Get Working Status, Connect
Transparent Channel, Disconnect Transparent Channel, Start Two-way Audio,
Stop Two-way Audio, Remote: Alarm Arming, Remote: Alarm Disarming,
Remote: Add Network Storage, Remote: Delete Network Storage, Remote: Set
Network Storage, Remote: Operate Bookmark, Remote: Delete HDD, Remote:
Remote: Load HDD, Remote: Unload HDD, Remote Configure SNMP, Remote: