User Manual
Table Of Contents
- Chapter 1 Product introduction
- Chapter 2 Physical installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Live view
- Chapter 6 Searching files
- Chapter 7 Playback functionality
- Chapter 8 Archiving files
- Chapter 9 Display settings
- Chapter 10 Camera setup
- Chapter 11 Network settings
- Chapter 12 Recording
- Chapter 13 Alarm and event setup
- Chapter 14 Device management
- Chapter 15 Storage management
- Chapter 16 User management
- Chapter 17 System information
- Chapter 18 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recording times
- Appendix D Default menu settings
- Index
TruVision NVR 22 (S/P) User Manual 132
Chapter 18
Using the web browser
This chapter describes how you can use the web browser interface to configure the
device, play back recorded video, search through event logs, and control a PTZ dome
camera. You can also specify settings on the web browser interface to optimize video
playback and recording performance when operating in a low or limited bandwidth
environment. Many of the browser configurations are similar to those done locally.
Internet Explorer users
Internet Explorer for Windows operating systems have increased security measures to
protect your PC from any malicious software being installed. When using the recorder
web browser interface, you can install ActiveX controls to connect and view video using
Internet Explorer.
To have complete functionality of the web browser interface and the recorder player
with Internet Explorer, do the following:
• Run the Browser interface and the recorder player application as an administrator in
your workstation
• Add the recorder’s IP address to your browser’s list of trusted sites
To add the recorder’s IP address to Internet Explorer’s list of trusted sites:
1. Open Internet Explorer.
2. Click Tools, and then Internet Options.
3. Click the Security tab, and then select the Trusted Sites icon.
4. Click Sites.
5. Clear the “Require server verification (https:) for all sites in this zone” box.
6. Enter the IP address or DDNS name in the “Add this website to the zone” field.
7. Click Add, and then click Close.
8. Click OK in the Internet Options dialog box.
9. Connect to the recorder for full browser functionality.