User Manual

Chapter 18: Using the web browser
144 TruVision NVR 22 (S/P) User Manual
Menu Function Description
Network Settings Network Settings Define the general network settings. See “Network settings”
on page 74 for more information.
PPPoE Define the PPPoE settings. See “PPPoE settings” on page
76 for more information.
DDNS Define the DDNS settings. See “DDNS settings” on page 77
for more information.
NTP Define the NTP server settings. See “NTP server settings”
on page 78 for more information.
Email Define the settings to send an e-mail. See “Email settings”
on page 79 for more information.
FTP Define the FTP settings. See “Configure an FTP server to
store snapshots” on page 80 for more information.
SNMP Define the SNMP settings. See “SNMP settings” on page 80
for more information.
UPnP Enable this function so that the recorder can automatically
configure its own port forwarding. See “UPnP settings” on
page 81 for more information.
More Settings Define a multicast IP as well as the server, HTTP, and RTSP
ports. See page 74.
Net Statistics Check the bandwidth being used by remote live view and
playback. See “Network statistics” on page 83 for more
information.
Recording Recording Schedule Define the recording schedules. See “Recording schedule”
on page 84 for more information.
Manual Recording Define which cameras can manually record. See “Manual
recording” on page 87 for more information.
Alarm & Event
Setup
Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Set up alarm inputs” on page 91 for
more information.
Alarm Output Define the response when an external alarm is triggered.
See “Manual trigger” on page 94 for more information.
Manual Trigger Define the manually trigger outputs of the recorder. See
“Manual trigger” on page 94 for further information.
Notifications Define the notification parameters when irregular events
occur, such as a HDD is full. See “Event notifications” on
page 95 for more information.
Video Loss Define the video loss detection settings. See “Detect video
loss” on page 97 for more information.
Alarm Host Setup Define the remote alarm host. See “Alarm host setup” on
page 98 for more information.
Intrusion Zone
Setup
Define the alarm panel in the recorder. See “OH alarm
reporting” on page 99 for more information.
Intrusion Panel
Setup
Define the zones in an alarm panel. See “OH alarm
reporting” on page 99 for more information.