User Manual

Chapter 5: Live View
TruVision NVR 22 (S/P) User Manual 23
Name Description
3.
Multi Camera Switch between the different multiview options from the drop-down
list. See “Single and multiview display mode” below for more
information.
4.
Previous Screen Displays the previous camera.
5.
Next Screen Displays the next camera.
6.
Start Sequence Turn on sequence mode. The window automatically sequences
between cameras. To set up the sequence dwell time, go to Menu >
Display Settings > Display > Sequence Dwell Time and select a
value.
Note: Not available for monitor B.
7.
24-hour Playback Playback the recorded video of the selected day from the selected
camera. The current day is selected by default.
8.
Monitor B/Monitor A Switch between monitors A (main) and B (event).
9.
Advanced Search Enter the advanced video search menu. See “Search video menu” on
page 41 for more information.
Note: Not available for monitor B.
10
. Output Mode Select Standard, Bright, Soft, or Vivid mode to display.
11
. Close TimeBar Open/close the time bar.
Single and multiview display mode
The recorder has single and multiview formats. The number of multiview display modes
available depends on the recorder model.
Single view display
format
Press the numeric button on the front panel to switch to the corresponding
camera display. For example, press button 10 to view camera 10.
-Or-
Right-click the mouse and select Single Camera from the menu. Select the
required camera from the list.
Multiple view display
format
Press the Display button on the front panel to cycle through different display
formats.
-Or-
Right-click the mouse and select Multi Camera from the menu. Select the
desired multiview display layout.