User Manual

ManualsBrandsInterlogix ManualsElectronics16 Channel IP Network Video Recorder - 6TB

Table Of Contents

Chapter 1 Product introduction
- Product overview
- Default settings to access the device
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel
- RS-232 port
- PoE ports
- Monitor connections
- Rack mounting
Chapter 3 Getting started
- Powering on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Controlling the recorder
- Using the front panel
- Using the mouse
- Using the IR remote control
- Menu overview
Chapter 5 Live view
- Description of live view
- Video output
- Live view mouse menu
- Single and multiview display mode
- Sequencing cameras
- Live view toolbar
- Digital zoom
- PTZ preset and tours
Chapter 6 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Log search
Chapter 7 Playback functionality
- Instant playback
- 24-hour playback
- Event playback
- Smart playback
- Split-screen playback
- Playback speed and skip time
- Play back frame-by-frame
- Digital zoom in playback
- Create bookmarks
- Lock playback files
- Manage playback files
Chapter 8 Archiving files
- Archiving files
- Create and archive video clips
- Playing back archived files on a PC
- Using TruVision Player
Chapter 9 Display settings
- Display settings
- Layout
Chapter 10 Camera setup
- IP camera status
- Using RTSP custom protocols
- PoE power budget (TVN 22S only)
- Camera recording settings
- Snapshots
- Camera OSD
- Image settings
- Motion detection
- Privacy mask
- Camera tamper
- VCA setup
- PTZ presets and tours
- V-stream encoding
- People counting
Chapter 11 Network settings
- Network settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- UPnP settings
- Network status
- Archive network packet data
- Network statistics
- Port forwarding
Chapter 12 Recording
- Recording schedule
- Modify the instant playback duration
- Manual recording
- Hot Spare
- SD card recording
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Alarm response actions
- Set up alarm outputs
- Manual trigger
- Alarm Audio
- Event notifications
- Detect video loss
- Alarm host setup
- OH alarm reporting
- TVRMobile push notifications
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- RS-232 settings
- Using a network storage system
Chapter 15 Storage management
- HDD information
- Storage mode
- Managing eSATA
- S.M.A.R.T. settings
- Bad sector detection
- RAID
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Admin password
Chapter 17 System information
- View system information
- Search the system log
Chapter 18 Using the web browser
- Internet Explorer users
- Access the web browser
- HTTPS settings
- Mac Safari Browser users
- Plug-in installation
- Web browser live view
- Control a PTZ dome camera via the web browser
- Play back recorded video
- Search for event logs
- Recording from the browser
- Configure the recorder via the browser
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C Maximum pre-recording times
Appendix D Default menu settings
Index

Chapter 5: Live View

26 TruVision NVR 22 (S/P) User Manual

Figure 10: Digital zoom window

To quickly zoom in/out on a camera image:

1. Left-click the mouse on the desired camera. The live view toolbar appears.

2. Click the digital-zoom icon. The digital view window appears.

3. Left-click the mouse and drag the red square to the area of interest, or press the

arrow buttons on the front panel to position the red square. The selected area is

magnified.

4. To exit digital zoom, right-click the mouse.

PTZ preset and tours

When in live view you can quickly call up the list of existing presets, preset tours, and

shadow tours by using the front panel, remote control, mouse, and keypad.

Front panel Press (Enter). PTZ control panel appears.

Mouse Left-click the mouse on the desired camera image. The live view toolbar appears.

Click the PTZ control icon to enter PTZ mode. The PTZ control panel appears.

Remote control Press the OK button. The PTZ control panel appears.

Keypad Press the Enter button on the keypad.

If the display was in multiview format, it changes to full-screen format for the selected

camera. See Figure 11 on page 27 for a description of the PTZ control panel.