User Manual
Table Of Contents
- Chapter 1 Product introduction
- Chapter 2 Physical installation
- Chapter 3 Getting started
- Chapter 4 Operating instructions
- Chapter 5 Live view
- Chapter 6 Searching files
- Chapter 7 Playback functionality
- Chapter 8 Archiving files
- Chapter 9 Display settings
- Chapter 10 Camera setup
- Chapter 11 Network settings
- Chapter 12 Recording
- Chapter 13 Alarm and event setup
- Chapter 14 Device management
- Chapter 15 Storage management
- Chapter 16 User management
- Chapter 17 System information
- Chapter 18 Using the web browser
- Appendix A Specifications
- Appendix B Port forwarding information
- Appendix C Maximum pre-recording times
- Appendix D Default menu settings
- Index
Chapter 6: Searching files
30 TruVision NVR 22 (S/P) User Manual
Search results
A search will usually produce a list of recording files, which may extend to several
pages. The files are listed by date and time. The most recent file is listed first. You can
then select a file to play it back. See Figure 13 below for an example of a search.
A recording file can be up to 1GB in size. Every day at midnight a new recording file is
started, and each event is also stored as a separate recording file.
Only one file can be played back at a time.
Figure 13: Example of a search result list
1. Click to lock recording to prevent it from being
overwritten.
2. Click to playback the selected video.
Search and play back recordings by time and
video type
You can search recorded video by time and video type, such as continuous recordings,
alarms and all recordings. Video can be played back simultaneously across several
cameras.
To search archived video files:
1. In live view, right-click the mouse on the desired video pane and select Search
Video.
– Or –
Click the Search icon on the front panel.
The Search menu appears.
2. Select the desired cameras, record type, file type as well as start and end times of
the recording.
3. Click Search. The list of search results appears.
4. Click to play back the search results: