User Manual

ManualsBrandsInterlogix ManualsElectronics16 Channel IP Network Video Recorder - 6TB

Table Of Contents

Chapter 1 Product introduction
- Product overview
- Default settings to access the device
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel
- RS-232 port
- PoE ports
- Monitor connections
- Rack mounting
Chapter 3 Getting started
- Powering on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Controlling the recorder
- Using the front panel
- Using the mouse
- Using the IR remote control
- Menu overview
Chapter 5 Live view
- Description of live view
- Video output
- Live view mouse menu
- Single and multiview display mode
- Sequencing cameras
- Live view toolbar
- Digital zoom
- PTZ preset and tours
Chapter 6 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Log search
Chapter 7 Playback functionality
- Instant playback
- 24-hour playback
- Event playback
- Smart playback
- Split-screen playback
- Playback speed and skip time
- Play back frame-by-frame
- Digital zoom in playback
- Create bookmarks
- Lock playback files
- Manage playback files
Chapter 8 Archiving files
- Archiving files
- Create and archive video clips
- Playing back archived files on a PC
- Using TruVision Player
Chapter 9 Display settings
- Display settings
- Layout
Chapter 10 Camera setup
- IP camera status
- Using RTSP custom protocols
- PoE power budget (TVN 22S only)
- Camera recording settings
- Snapshots
- Camera OSD
- Image settings
- Motion detection
- Privacy mask
- Camera tamper
- VCA setup
- PTZ presets and tours
- V-stream encoding
- People counting
Chapter 11 Network settings
- Network settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- UPnP settings
- Network status
- Archive network packet data
- Network statistics
- Port forwarding
Chapter 12 Recording
- Recording schedule
- Modify the instant playback duration
- Manual recording
- Hot Spare
- SD card recording
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Alarm response actions
- Set up alarm outputs
- Manual trigger
- Alarm Audio
- Event notifications
- Detect video loss
- Alarm host setup
- OH alarm reporting
- TVRMobile push notifications
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- RS-232 settings
- Using a network storage system
Chapter 15 Storage management
- HDD information
- Storage mode
- Managing eSATA
- S.M.A.R.T. settings
- Bad sector detection
- RAID
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Admin password
Chapter 17 System information
- View system information
- Search the system log
Chapter 18 Using the web browser
- Internet Explorer users
- Access the web browser
- HTTPS settings
- Mac Safari Browser users
- Plug-in installation
- Web browser live view
- Control a PTZ dome camera via the web browser
- Play back recorded video
- Search for event logs
- Recording from the browser
- Configure the recorder via the browser
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C Maximum pre-recording times
Appendix D Default menu settings
Index

Chapter 7: Playback functionality

38 TruVision NVR 22 (S/P) User Manual

24-hour playback

Use this option to access one day of video recordings for the selected camera.

Playback starts at midnight and runs for the 24-hour period. 24-hour playback is shown

in full-screen view. See Figure 15 on page 36 for a description of the playback control

toolbar. For the current day, playback will also start at midnight and runs until the most

recent recordings.

• Using the mouse:

1. In live view mode right-click the mouse on the desired camera image. In the mouse

toolbar, click 24-hour Playback.

The playback screen appears. By default, the camera is in full-screen mode.

2. To select more than one camera for synchronous playback or to select playback

from a different day, move the mouse to the right edge of the screen. The camera

list and calendar appear. Check the desired cameras and/or another day. Up to

eight cameras can be selected.

Playback starts immediately you have selected the camera and times.

Note: A message appears if there are no recordings found during this period.

3. Use the playback control toolbar to manually control playback.

4. Click Exit or right-click the mouse to return to live view.

• Using the front panel:

1. Select the camera for playback and press the Play button. Playback from the

selected camera starts immediately.

Note: Synchronous playback is only available using the mouse. If live view was

showing multiview, only the camera in the top-left channel on screen will be played

back.

2. To select a different camera for playback, press the numerical button of the desired

camera.

3. Press Live to return to live view.

24-hour playback modes

You can select one of seven different 24-hour playback modes (see item 1 in Figure 14

on page 35). They are:

Playback mode Description

Normal Play back recordings from the selected cameras of the selected day.

Select the desired cameras and day to play back. Playback starts

immediately.

You can select all the playback toolbar options.

Event Play back recorded selected VCA, alarm inputs or motion events. See