User Manual

ManualsBrandsInterlogix ManualsElectronics16 Channel IP Network Video Recorder - 6TB

Table Of Contents

Chapter 1 Product introduction
- Product overview
- Default settings to access the device
Chapter 2 Physical installation
- Installation environment
- Unpacking the recorder and its accessories
- Back panel
- RS-232 port
- PoE ports
- Monitor connections
- Rack mounting
Chapter 3 Getting started
- Powering on the recorder
- The startup wizard
Chapter 4 Operating instructions
- Controlling the recorder
- Using the front panel
- Using the mouse
- Using the IR remote control
- Menu overview
Chapter 5 Live view
- Description of live view
- Video output
- Live view mouse menu
- Single and multiview display mode
- Sequencing cameras
- Live view toolbar
- Digital zoom
- PTZ preset and tours
Chapter 6 Searching files
- Advanced search video menu
- Search and play back recordings by time and video type
- Search and play back recordings by event
- Search bookmarked recordings
- Search snapshots
- Log search
Chapter 7 Playback functionality
- Instant playback
- 24-hour playback
- Event playback
- Smart playback
- Split-screen playback
- Playback speed and skip time
- Play back frame-by-frame
- Digital zoom in playback
- Create bookmarks
- Lock playback files
- Manage playback files
Chapter 8 Archiving files
- Archiving files
- Create and archive video clips
- Playing back archived files on a PC
- Using TruVision Player
Chapter 9 Display settings
- Display settings
- Layout
Chapter 10 Camera setup
- IP camera status
- Using RTSP custom protocols
- PoE power budget (TVN 22S only)
- Camera recording settings
- Snapshots
- Camera OSD
- Image settings
- Motion detection
- Privacy mask
- Camera tamper
- VCA setup
- PTZ presets and tours
- V-stream encoding
- People counting
Chapter 11 Network settings
- Network settings
- DDNS settings
- NTP server settings
- Email settings
- Configure an FTP server to store snapshots
- SNMP settings
- UPnP settings
- Network status
- Archive network packet data
- Network statistics
- Port forwarding
Chapter 12 Recording
- Recording schedule
- Modify the instant playback duration
- Manual recording
- Hot Spare
- SD card recording
Chapter 13 Alarm and event setup
- Set up alarm inputs
- Alarm response actions
- Set up alarm outputs
- Manual trigger
- Alarm Audio
- Event notifications
- Detect video loss
- Alarm host setup
- OH alarm reporting
- TVRMobile push notifications
Chapter 14 Device management
- Time and date settings
- General recorder settings
- Configuration files
- Upgrade system firmware
- Holiday schedules
- RS-232 settings
- Using a network storage system
Chapter 15 Storage management
- HDD information
- Storage mode
- Managing eSATA
- S.M.A.R.T. settings
- Bad sector detection
- RAID
Chapter 16 User management
- Add a new user
- Customize a user’s access privileges
- Delete a user
- Modify a user
- Change the Admin password
Chapter 17 System information
- View system information
- Search the system log
Chapter 18 Using the web browser
- Internet Explorer users
- Access the web browser
- HTTPS settings
- Mac Safari Browser users
- Plug-in installation
- Web browser live view
- Control a PTZ dome camera via the web browser
- Play back recorded video
- Search for event logs
- Recording from the browser
- Configure the recorder via the browser
Appendix A Specifications
Appendix B Port forwarding information
- Seeking further assistance
Appendix C Maximum pre-recording times
Appendix D Default menu settings
Index

Chapter 7: Playback functionality

40 TruVision NVR 22 (S/P) User Manual

3. Select the start and end dates and times for the event search.

4. Click Search to searching for the desired events.

The results are listed on the right side of the window. Each individual recorded event

is listed. They are collectively not shown on the playback toolbar.

5. Select the desired pre and post-event times (between 5 and 600 seconds). Default

time is 30 seconds.

Note: These pre and post event times are independent to the times set for camera

recordings under Camera Setup > Camera Recordings Settings.

6. Click the desired camera recording to play back. Its time bar also appears on the

playback toolbar.

7. Click Exit to stop the play back and return to the previous window. You can do

another search selection.

8. Click to exit playback and return to live view.

Smart playback

This feature lets you selectively playback the parts of a recording with VCA and motion

events and skip over video that does not have such events. The Smart Playback mode

analyses the video for VCA and motion events and marks them. See Figure 16 below.