User Manual

Chapter 10: Camera setup
TruVision NVR 22 (S/P) User Manual 59
Figure 22: PoE power budget information on IP cameras
1. Select the PoE type required for each camera.
2. Dynamic tracking of the current PoE power consumption (blue), unallocated PoE power (white), and
remaining allocated PoE power budget (green) shown.
The IP cameras will specify which type of PoE they require. You can set up each
camera individually for No PoE, PoE-at, PoE-af, or 12.5 W. A PoE port can support up
to 30 W maximum.
The recorder has a maximum of 8 or 16 PoE ports, depending on the model. The total
PoE power budget for the 8-channel recorder is 120 W, and that for the 16-channel
recorder is 200 W.
The PoE-af port can support between 0 and 15.4 W and the PoE-at port can support
between 0 and 30 W. See Table 12 below for a description of the maximum number of
IP cameras that can be connected depending on the PoE type used.
Table 12: Maximum number of IP cameras that can be connected by PoE power consumption
Recorder
Total PoE
power budget
Maximum number of IP cameras connected
12.5 W 15 W PoE-af PoE-at
TVN
-2208S 120 - 8 7 4
TVN
-2216S 200 16 - 12 6
Note: The PoE power specifications are the PoE power available at the recorder.
However, depending on the cable length and cable quality you can experience a loss of
PoE power. Ensure that this is taken into account when configuring the system.
To display the PoE power consumption information:
1. From the menu toolbar, click Camera Management > Camera > PoE Setup.
2. Select the PoE type required for each camera: No PoE, PoE-af, PoE-at, or 12.5 W.
3. Click Apply to save the settings and then click Back to return to live view.