User Manual

Chapter 10: Camera setup
60 TruVision NVR 22 (S/P) User Manual
Automatically allocating PoE power (TVN 22S only)
The recorder can be set up to automatically allocate PoE power depending on each
camera’s needs. Note that if the full PoE budget (120/200 W) is used on the first seven
ports, for example, PoE port 8 will no longer be powered.
To set up auto PoE:
1. From the menu toolbar, click Camera Management > Camera > PoE Setup.
2. Check Auto PoE.
3. Click Apply to save the settings and then click Exit to return to live view.
Camera recording settings
The camera recording settings allow you to define the configuration per camera per
stream recording mode.
To configure recording settings:
1. From the menu toolbar, click Camera Recording Settings.
2. Select the camera you want to configure.
3. Configure the following recording settings (options available depend on the camera
model):
• Stream Record Mode: Select one of the stream types to configure the recording
parameters of that record mode: Mainstream (TL-Hi) (default), Mainstream (TL-
Lo), Mainstream (Event), Mainstream (Alarm), or Substream.
• Stream Type: Select the type of stream to record, either Video or Video &
Audio. Default is Video.
• Resolution: Select the resolution of the recording. Options include: 8MP, 6MP,
5MP, 3MP, 1080p, UXGA, 720p, VGA, 4CIF, DCIF, 2CIF, CIF, QCIF.