User Manual

TruVision NVR 22 (S/P) User Manual 1
Chapter 1
Product introduction
Product overview
The TruVision NVR 22 (TVN 22) series is a versatile, user-friendly embedded network
video recorder (NVR) series. The standard series supports up to 8, 16 or 32 channels
and up to 4 SATA hard drives.
The TVN 22S model includes an 8 or 16 channels version and an embedded PoE
switch that allows TruVision cameras to be connected in a plug and play manner.
Simply plug in the IP camera to automatically power and connect it, assign the IP
address, as well as set it up using default values. The embedded 8/16 PoE switch
provides a maximum PoE wattage of respectively 120 W and 200 W.
The TVN 22P series supports 16 or 32 channels (16, 32 or 64 channels in EMEA only)
and up to 8 SATA hard drives. The full TVN 22 series provides integration with the UTC
portfolio of security solutions, and offers a seamless user experience within the
TruVision brand.
The TVN 22 series can be configured and operated through its on-screen display
(OSD), web browser, mobile applications, TruVision Navigator software, or third party
software using the TruVision SDK.
The recorder can be fully managed by the license-free TruVision Navigator software -
ideal for most commercial applications. It’s easy and intuitive web browser interface
enables remote configuration, viewing and searching of video on any TruVision
recorders.
Default settings to access the device
Default user names and passwords
See Table 1 on page 2 for the list of default user names and passwords. Go to
Chapter 16 “User management” on page 121 for further information.